Port Forwarding for the Linksys WRT54G

 

To setup port forwarding on this router your computer needs to have a static ip address.  When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

Please enter the static ip you want to forward to:

192.168.1.




Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.1.1.




You should see a box prompting you for your username and password. Enter your username and password now. By default the username is blank, and the password is admin. Click the Ok button to log in to your router.




Click the Security link near the top of the page.




Remove the checkmark from the Block Anonymous Internet Requests checkbox.

Click the Save Settings button near the bottom of the page.

Click the Applications & Gaming link near the top of the page.

You should now see a new menu. In this new menu, click Port Range Forward.




Port Range
Application Start End Protocol IP Address Enable
To 192.168.1.

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Eyemax requires you to forward the 9091-9115 ports. Go ahead and enter the settings shown above into the Port Range Forward menu.

When you're finished, click Save Settings near the bottom of the screen to save your changes.

And that's it! You're done!